HowTo AtomSmoke

How do you smoke the AtomSmoke e-cigarette?

E-smoking is different than normal smoking.  When you inhale, you should consider the following:
Do not inhale continuously or for a long period. Do not pull too heavy, too fast or too many times in a short period of time, this will have a negative effect on the cigarette function.
Always pull slowly and let the atomizer rest for at least 3 minutes between 4-5 pulls. Over use in a short period of time will lead to malfunctions. If you wish to inhale more, or more frequently, it is advised to use 2 sets of e-cigarettes.
Do not use liquids or cartridges other than those delivered with your e-cigarette.

Maintenance

  1. Clean the battery and atomizer by using rubbing alcohol to clean the contact points of the battery and atomizer with a clean paper tissue or cotton swab.  By doing this regularly, your cigarette will perform better and last longer.
  2. Leave your atomizer sitting steel wool side down on a papertowel over night so the remaining e-liquid will leak out.
  3. If you feel your cigarette does not produce enough smoke or the pulling becomes heavy, it is time to clean. Blow through the atomizer side, on the other side you will see liquid coming out. After this operation, clean everything and dry it with a paper towel.  If the cigarette does not perform better, go to point 4.
  4. Self resetting: If you have the impression your cigarette does not develop enough smoke or the pulling is heavy you can try this: put the LED side in your mouth and blow on it. There are 2 little holes next to the LED light. Now your atomizer heats up and burns the rest liquid on the atomizer. Do not exceed 12 seconds of blowing or your atomizer will burn dead. After this operation your cigarette will function normal again. You will need to replace the battery and charge the one you just used.

 

Grand cleaning operation

Sometimes you might think your atomizer is dead, because smoke reduces significantly. In this case you can do the following:

  • Take out the cartridge mouthpiece and battery.
  • Clean contact points of battery and atomizer with rubbing alcohol.
  • Take the atomizer with the big opening up and pour rubbing alcohol inside. Shake the atomizer for at least 2 minutes, drain the alcohol through the small hole at the other side and repeat this at least 3 times
  • Rinse the atomizer with hot water and let it dry for 16 hours standing up.
  • After 16 hours, if your atomizer is dry, you can put in a new cartridge and new battery. Your cigarette will work normal again.